ファイル:Oscillograph Cinematograph Camera.png

元のファイル(1,648 × 2,456 ピクセル、ファイルサイズ: 768キロバイト、MIME タイプ: image/png)

概要

Illustration Description

Figure 2621, 2622, 2623 -- Interior of cinematograph camera as used on Duddell moving coil oscillograph for obtaining long records. The loose ends of the case are shown removed and one of the reels which carry the film lying in front.

The spool of film is placed on the loose reel A, passes over the guide pulley B, then vertically downward between the brass plate C.

The exposure aperture is in the plate C, and the springs which press the plate D flat on the plate C, prevent the film from having any but a vertical motion as it passes the exposure slit. E is the sprocket driving pulley which engages with the perforations on the film and unwinds it from reel A to reel H.

Outside the case on the far side of it is secured to the axle G a three-speed cone pulley. This is driven by a motor of about 1/7 horsepower, which also drives, the the gears shown, the sprocket pulley E. Close to the grooved cone pulley is a lever which is attached to the falling plate camera case, the brake can be suddenly released and at the same time the jockey pulley caused to tighten the belt onto the grooved cone pulley, so that the starting and stopping of the film is controlled independently of the driving motor, and being quickly accomplished avoids waste of film.

Both reels are alike and each is made in two pieces. The upper reel is loose on its axle and its motion is retarded slightly by a friction brake. The lower reel is also loose on its axle, but it is driven by means of a friction clutch, the clutch always rotating faster than the reel so that the used film delivered by the sprocket pulley E is wound up as fast as delivered.

K is the front face of one reel, the boss on it pushes into the tube on the other half H, which serves not only to unite the two halves, but also to secure the end of the film which is doubled through J.

Public Domain Source

  • Hawkins Electrical Guide, Volume 6
  • Chapter 63: Wave Form Measurement
  • Page 1866, Figures 2621, 2622, 2623
  • Copyright 1917 by Theo. Audel & Co.
  • Printed in the United States

Upload Notes

  • Scanned by User:DMahalko, Dale Mahalko, Gilman, WI, USA -- Email: dmahalko@gmail.com
  • Scanned at 600dpi, 8-bit grayscale
  • Level-adjusted and touched up to remove dust and smudging from the printing process

See Also

For a list of all these illustrations used in Wikipedia please see the article Hawkins Electric Guide on the English Wikipedia.

ライセンス

Public domain
Public domain
このファイルはアメリカ合衆国においてパブリックドメインの状態にあります。これは多くの場合、最初の公表が1929年1月1日以前であるために著作権が消滅したアメリカ合衆国の著作物に適用されます。より詳細な説明については、このページをご覧ください。

United States
United States
このファイルはアメリカ合衆国以外ではパブリックドメインの状態にはない可能性があり、この点は、特に、カナダ、中華人民共和国(香港・マカオを除く)、ドイツ、メキシコ及びスイスのようにアメリカ合衆国の著作物の著作権の保護期間について相互主義を採用していない国・地域で当てはまります。作者や公表年は必要な情報であり、条件とされるべきものです。詳細についてはWikipedia:Public domain及びWikipedia:Copyrightsをご覧ください。

キャプション

このファイルの内容を1行で記述してください

このファイルに描写されている項目

題材

ファイルの履歴

過去の版のファイルを表示するには、その版の日時をクリックしてください。

日付と時刻サムネイル寸法利用者コメント
現在の版2008年7月5日 (土) 10:382008年7月5日 (土) 10:38時点における版のサムネイル1,648 × 2,456 (768キロバイト)DMahalko=== Illustration Description === Figure 2621, 2622, 2623 -- Interior of cinematograph camera as used on Duddell moving coil oscillograph for obtaining long records. The loose ends of the case are shown removed and one of the reels which carry the film lyi

以下のページがこのファイルを使用しています:

グローバルなファイル使用状況

以下に挙げる他のウィキがこの画像を使っています: