元のファイル(2,592 × 1,944 ピクセル、ファイルサイズ: 2.14メガバイト、MIME タイプ: image/jpeg)

概要

解説
English: Switch bounce on a HP 54501A digitising oscilloscope. A latching switch was used, one end connected to 12V and the other end to the oscilloscope. The oscilloscope is set to trigger above 3V. As can be clearly seen the switch bounces between (hence the term, switch bounce) on and off several times for at least 1 millisecond after it is switched. The decaying waveform is due to the relatively large capacitance of the switch (a few nanofarads) compared to the relatively high impedance of the oscilloscope (about 1 meg-ohm.)
日付
原典 投稿者自身による著作物
作者 Tomoldbury
許可
(ファイルの再利用)
Public domain. Picture of oscilloscope. The oscilloscope is running firmware from 1988; I assume it is OK to take a screenshot of a 'scope.

ライセンス

Public domain この著作物の著作権者である私は、この著作物における権利を放棄しパブリックドメインとします。これは全世界で適用されます。
一部の国では、これが法的に可能ではない場合があります。その場合は、次のように宣言します。
私は、あらゆる人に対して、法により必要とされている条件を除き、如何なる条件も課すことなく、あらゆる目的のためにこの著作物を使用する権利を与えます。

キャプション

このファイルの内容を1行で記述してください

このファイルに描写されている項目

題材

7 7 2010

ファイルの履歴

過去の版のファイルを表示するには、その版の日時をクリックしてください。

日付と時刻サムネイル寸法利用者コメント
現在の版2010年7月7日 (水) 00:112010年7月7日 (水) 00:11時点における版のサムネイル2,592 × 1,944 (2.14メガバイト)Tomoldbury{{Information |Description={{en|1=Switch bounce on a HP 54501A digitising oscilloscope. A latching switch was used, one end connected to 12V and the other end to the oscilloscope. The oscilloscope is set to trigger above 3V. As can be clearly seen the swi

以下のページがこのファイルを使用しています:

グローバルなファイル使用状況

以下に挙げる他のウィキがこの画像を使っています:

メタデータ